Chaparral FS 1310 User Manual download pdf (Page 47)

Configuring the Router

3-19

2 Select Restore Defaults and press Enter.

The Restore Defaults screen displays. The selected option is marked with an * next to it.

Select Ye s and press Enter to make the change.

The system confirms that the changes are made.

Press Enter to return to the Configuration Menu.

Rebooting the Router

You must reboot the router after you change the topology, Loop ID, or router LUN. You

should also reboot the router when you connect new devices.

To reboot the router:

From the System Menu, select Shutdown/Restart and press Enter.

The system confirms that you want to shut down.

Select Ye s and press Enter.

The system confirms that it has shut down.

Press Enter to reboot.

The system performs its self-test. When you see the Router Administrator initial

screen, the router is ready. See Accessing the Router Administrator Software on

page 3-1.

If you are connected via Telnet, disconnect and reconnect the Telnet session.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 95 96

No comments

Chaparral FS 1310 User Manual Page 47